{"title":"Star Micronics","description":"\u003cp\u003eDiscover unbeatable deals on the latest Star Micronics printers and scanners available to ship today!\u003c\/p\u003e","products":[{"product_id":"star-tsp143ivue-gry-usb-c-eth-39473010","title":"Star Micronics TSP143IVUE Thermal Receipt Printer 250 mm\/sec USB-C Ethernet Auto Cutter Grey 39473010","description":"\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent TSP100IV generation hardware, not the earlier TSP100III chassis.\u003c\/li\u003e\n\u003cli\u003ePrints direct thermal receipts at up to 250 mm per second at 203 dpi.\u003c\/li\u003e\n\u003cli\u003eDual interface: 10\/100 Ethernet for the network plus USB-C for a directly attached host.\u003c\/li\u003e\n\u003cli\u003eSeparate USB Type-A host port charges and drives an Android device over Android Open Accessory.\u003c\/li\u003e\n\u003cli\u003eSupported on Star CloudPRNT Next, so the printer can be driven from a hosted service.\u003c\/li\u003e\n\u003cli\u003eShips with both cables in the box, a USB-C to USB-A lead and an Ethernet patch lead.\u003c\/li\u003e\n\u003cli\u003eAt 140 by 169 by 123 mm this is the smallest of the three TSP143 models we stock.\u003c\/li\u003e\n\u003cli\u003eGuillotine auto cutter rated for 2,000,000 cuts, with a 100 km print head life.\u003c\/li\u003e\n\u003cli\u003eThe power supply is built into the printer, so only a mains cord leaves the unit.\u003c\/li\u003e\n\u003cli\u003eDrives a cash drawer or external buzzer from the built-in peripheral connector.\u003c\/li\u003e\n\u003cli\u003eTakes 80 mm and 58 mm receipt rolls, with the 58 mm paper guide supplied in the box.\u003c\/li\u003e\n\u003cli\u003eEnergy Star certified, and backed in the United States by a 2-year Star warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e TSP143IVUE Grey, Star generation TSP100IV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterfaces:\u003c\/strong\u003e Ethernet and USB-C, plus USB Type-A host at 1.5 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint method:\u003c\/strong\u003e Direct thermal line printing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e Up to 250 mm per second\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e 203 dpi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedia width:\u003c\/strong\u003e 80 mm and 58 mm rolls, up to 83 mm roll diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint width:\u003c\/strong\u003e 72 mm on 80 mm paper, 51 mm on 58 mm paper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto cutter:\u003c\/strong\u003e Guillotine, rated 2,000,000 cuts, 100 km print head life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Internal supply, 100 to 240 V AC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeripheral port:\u003c\/strong\u003e Cash drawer and external buzzer connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years in the United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 140 x 169 x 123 mm, approximately 1.3 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich generation this is\u003c\/h3\u003e\n\u003cp\u003eThe supplier part description for 39473010 reads TSP143 IVUE, and it is easy to read that as a variant of the TSP143III. It is not. The IV is the generation: this is a TSP100IV, Star's 2022 platform, and it is a different printer from the TSP100III in body, ports and software support. It is roughly 20 percent smaller than the III, it uses USB-C rather than USB Type-B, and it is the only one of the three TSP143 models we stock that appears on Star's CloudPRNT Next compatibility list. If you are matching an existing estate of TSP100III printers, this is not a like-for-like spare; if you are buying new, it is the current model.\u003c\/p\u003e\n\u003ch3\u003eEthernet and USB-C\u003c\/h3\u003e\n\u003cp\u003eThis part number is the dual interface build. An RJ45 Ethernet port puts the printer on the store network so any till, tablet or back-office system can reach it by address, and a USB-C port takes a direct connection from a PC or Mac when a network is not wanted. A third port, USB Type-A, is there for the device rather than the host: it supports Android Open Accessory so an Android tablet can drive the printer over the same lead that charges it, at up to 1.5 amps. What this part number does not have is Bluetooth or Wi-Fi. Those live on separate Star part numbers, and at least one distributor catalogue lists wireless against this code in error.\u003c\/p\u003e\n\u003ch3\u003eCloud and integration\u003c\/h3\u003e\n\u003cp\u003eStar lists the TSP143IV on its CloudPRNT Next compatible model table, which matters if you want a hosted ordering platform to push a receipt or a kitchen ticket to the printer without a local application in the middle. PromoPRNT can add a promotional footer to a printed receipt. On the development side Star publishes the StarXpand SDK for iOS, Android and React Native, the older StarPRNT SDK, a CloudPRNT SDK and the WebPRNT browser interface, alongside conventional Windows drivers, OPOS, JavaPOS and CUPS for Mac and Linux. Neither TSP100III model in this range supports CloudPRNT Next.\u003c\/p\u003e\n\u003ch3\u003eSpeed and cutter life\u003c\/h3\u003e\n\u003cp\u003eEvery TSP143 in this range prints at the same headline rate, up to 250 millimetres per second at 203 dpi, which clears a normal grocery or hospitality receipt in about a second. What separates a printer that lasts from one that does not is the cutter, and Star rates the guillotine here at two million cuts. The print head is rated for 100 kilometres of paper and the mechanism carries a 60 million line MCBF figure. For a till running two hundred transactions a day those numbers are the difference between a consumable and a fixture. Media handling is drop-in: lift the cover, drop the roll in, close it, and the printer feeds and cuts without threading.\u003c\/p\u003e\n\u003ch3\u003eInternal power supply\u003c\/h3\u003e\n\u003cp\u003eThe power supply is inside the printer. That sounds like a footnote until you have wired a counter and discovered that the printer needs somewhere to hide a brick, and that the brick has to sit where a cleaner will not kick it. Star runs mains straight into the chassis at 100 to 240 volts, 50 or 60 hertz, so the only thing leaving the printer is a detachable mains cord. It makes the unit slightly deeper than a printer with an external adapter and considerably tidier once installed. It also means one fewer part to lose when a unit is moved between sites, and one fewer thing to specify when you order a replacement.\u003c\/p\u003e\n\u003ch3\u003eWhat is included\u003c\/h3\u003e\n\u003cp\u003eStar's datasheet for this part number lists the printer, a mains power cable, a USB-C to USB Type-A data cable, an Ethernet cable and the 58 millimetre paper guide. Shipping both interface cables is unusual and worth knowing, because it means the printer works out of the box whichever of the two connection methods you choose on the day. Some distributor listings additionally claim a mounting kit and a starter paper roll against this code; Star's own included-items list does not itemise either, so we do not claim them. If you need a wall or under-counter mount, specify it separately rather than assuming one is in the carton.\u003c\/p\u003e\n\u003ch3\u003eWarranty and support\u003c\/h3\u003e\n\u003cp\u003eStar covers this printer in the United States with a 2-year warranty, and offers EXTEND-A-STAR and SWAP-A-STAR service plans that take the term to three or four years, with SWAP-A-STAR providing an advance replacement unit rather than a repair turnaround. Note that Star's European operation publishes a longer standard term; the figure that applies to a printer bought in the United States is the 2-year one, and that is what we quote. Drivers, manuals and configuration utilities remain available from Star's support site, and the unit is Energy Star certified.\u003c\/p\u003e\n\u003cp\u003eFor a new counter that needs a networked receipt printer with a current-generation platform, a two million cut guillotine and no power brick to hide, the Star TSP143IVUE 39473010 is a strong choice. Contact us to learn more or secure this solution for your business today.\u003c\/p\u003e","brand":"Star Micronics","offers":[{"title":"Default Title","offer_id":46802990923973,"sku":"39473010","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/2846\/5605\/files\/star-micronics-tsp143ivue-thermal-receipt-printer-250-mm-sec-39473010.jpg?v=1787578401"},{"product_id":"star-tsp143iiibi2-gry-bluetooth-39474710","title":"Star Micronics TSP143IIIBI2 Thermal Receipt Printer 250 mm\/sec Bluetooth Auto Cutter Grey 39474710","description":"\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth is the data interface, so the printer needs no data cable at all.\u003c\/li\u003e\n\u003cli\u003ePaired and supported by Star across iOS, Android and Windows hosts.\u003c\/li\u003e\n\u003cli\u003ePrints direct thermal receipts at up to 250 mm per second at 203 dpi.\u003c\/li\u003e\n\u003cli\u003eAuto Connection ships enabled, which is the correct setting for an iOS till.\u003c\/li\u003e\n\u003cli\u003eA rear reset button reinitialises the Bluetooth settings without opening the printer.\u003c\/li\u003e\n\u003cli\u003eRear USB port supplies 1.0 A to charge a tablet; it carries power only, never data.\u003c\/li\u003e\n\u003cli\u003eStar part 39474710 supersedes the earlier 39472110 within the same generation.\u003c\/li\u003e\n\u003cli\u003eGuillotine auto cutter rated for 2,000,000 cuts, with a 100 km print head life.\u003c\/li\u003e\n\u003cli\u003eThe power supply is built into the printer, so only a mains cord leaves the unit.\u003c\/li\u003e\n\u003cli\u003eDrives a cash drawer or external buzzer from the built-in peripheral connector.\u003c\/li\u003e\n\u003cli\u003eTakes 80 mm and 58 mm receipt rolls, with the 58 mm paper guide supplied in the box.\u003c\/li\u003e\n\u003cli\u003eEnergy Star certified, and backed in the United States by a 2-year Star warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e TSP143IIIBI2 Grey, Star generation TSP100III\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterfaces:\u003c\/strong\u003e Bluetooth only for data, plus a 1.0 A USB charging port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint method:\u003c\/strong\u003e Direct thermal line printing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e Up to 250 mm per second\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e 203 dpi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedia width:\u003c\/strong\u003e 80 mm and 58 mm rolls, up to 83 mm roll diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint width:\u003c\/strong\u003e 72 mm on 80 mm paper, 51 mm on 58 mm paper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto cutter:\u003c\/strong\u003e Guillotine, rated 2,000,000 cuts, 100 km print head life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Internal supply, 100 to 240 V AC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeripheral port:\u003c\/strong\u003e Cash drawer and external buzzer connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years in the United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 142 x 204 x 132 mm, approximately 1.68 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eA cable-free counter\u003c\/h3\u003e\n\u003cp\u003eBluetooth is the entire data story on this part number. There is no Ethernet, no Wi-Fi and no USB data connection, which sounds limiting until you are putting a printer on a market stall, a pop-up counter, a bar station or a customer-facing desk where a trailing data cable is the problem you are trying to solve. Star supports pairing from iOS, Android and Windows, so the same printer follows a tablet-based till system across all three. The only cord is the mains lead. That is a genuinely different installation from a wired printer, and it is the reason to choose this code over the USB or Ethernet builds of the same family.\u003c\/p\u003e\n\u003ch3\u003eAbout that USB port\u003c\/h3\u003e\n\u003cp\u003eThere is a USB port on the back of this printer and it is not a data port. Star's own manual describes it as a 1.0 amp supply that can provide power to USB devices such as tablets, which in practice means the iPad or Android tablet running your till can charge from the printer instead of occupying a second mains socket. Several distributor listings describe this as built-in USB in a way that reads like connectivity, and buyers have been caught out by it. If you need a wired USB data connection, the part you want is the TSP143IIIU, 39472310, which is a different printer with two genuine USB ports.\u003c\/p\u003e\n\u003ch3\u003ePairing and setup\u003c\/h3\u003e\n\u003cp\u003eStar ships this printer with Auto Connection enabled. That is the correct setting for an iOS host, where the printer needs to re-establish the link on its own after a device sleeps or moves out of range. For an Android host the documented guidance is the opposite: turn Auto Connection off, or the printer will hold a connection the Android device is trying to renegotiate. A recessed reset button on the rear panel reinitialises the Bluetooth settings if a pairing goes wrong, which saves opening the printer or reaching for a utility. Star does not publish a Bluetooth version or range figure for this model, so we do not quote one.\u003c\/p\u003e\n\u003ch3\u003eSpeed and cutter life\u003c\/h3\u003e\n\u003cp\u003eEvery TSP143 in this range prints at the same headline rate, up to 250 millimetres per second at 203 dpi, which clears a normal grocery or hospitality receipt in about a second. What separates a printer that lasts from one that does not is the cutter, and Star rates the guillotine here at two million cuts. The print head is rated for 100 kilometres of paper and the mechanism carries a 60 million line MCBF figure. For a till running two hundred transactions a day those numbers are the difference between a consumable and a fixture. Media handling is drop-in: lift the cover, drop the roll in, close it, and the printer feeds and cuts without threading.\u003c\/p\u003e\n\u003ch3\u003eInternal power supply\u003c\/h3\u003e\n\u003cp\u003eThe power supply is inside the printer. That sounds like a footnote until you have wired a counter and discovered that the printer needs somewhere to hide a brick, and that the brick has to sit where a cleaner will not kick it. Star runs mains straight into the chassis at 100 to 240 volts, 50 or 60 hertz, so the only thing leaving the printer is a detachable mains cord. It makes the unit slightly deeper than a printer with an external adapter and considerably tidier once installed. It also means one fewer part to lose when a unit is moved between sites, and one fewer thing to specify when you order a replacement.\u003c\/p\u003e\n\u003ch3\u003eWhat is included\u003c\/h3\u003e\n\u003cp\u003eStar's accessory list for this printer covers the main unit, a mains power cable, the paper roll guide for 58 millimetre media, a wall mounting bracket with two screws, four rubber feet, a switch cover and the Easy Setup and Safety guides. There is no interface cable in the box, and correctly so: the interface is Bluetooth, so there is nothing to plug in. Star's own note is that included accessories vary by model, and its United States marketing copy mentions a starter paper roll that the factory accessory list does not itemise, so treat a first roll as something to order rather than something to expect.\u003c\/p\u003e\n\u003ch3\u003eWarranty and support\u003c\/h3\u003e\n\u003cp\u003eStar covers this printer in the United States with a 2-year warranty, and offers EXTEND-A-STAR and SWAP-A-STAR service plans that take the term to three or four years, with SWAP-A-STAR providing an advance replacement unit rather than a repair turnaround. Note that Star's European operation publishes a longer standard term; the figure that applies to a printer bought in the United States is the 2-year one, and that is what we quote. Drivers, manuals and configuration utilities remain available from Star's support site, and the unit is Energy Star certified.\u003c\/p\u003e\n\u003cp\u003eFor a mobile, pop-up or tablet-led counter where a data cable is the thing you are trying to get rid of, the Bluetooth Star TSP143IIIBI2 39474710 does the job with nothing but a mains lead. Contact us to learn more or secure this solution for your business today.\u003c\/p\u003e","brand":"Star Micronics","offers":[{"title":"Default Title","offer_id":46802990989509,"sku":"39474710","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/2846\/5605\/files\/star-micronics-tsp143iiibi2-thermal-receipt-printer-250-mm-sec-39474710.jpg?v=1787578403"},{"product_id":"star-tsp143iiiu-gry-usb-ios-39472310","title":"Star Micronics TSP143IIIU Thermal Receipt Printer 250 mm\/sec USB iOS Auto Cutter Grey 39472310","description":"\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo separate USB ports: Type-B for a Windows or Android host, Type-A for an iOS device.\u003c\/li\u003e\n\u003cli\u003eApple MFi certified, so an iPad can be driven and charged over one Lightning to USB-A lead.\u003c\/li\u003e\n\u003cli\u003ePrints direct thermal receipts at up to 250 mm per second at 203 dpi.\u003c\/li\u003e\n\u003cli\u003eThe USB A-to-B host cable is supplied; the Lightning lead for an iPad is not.\u003c\/li\u003e\n\u003cli\u003eNo network interface of any kind, which keeps the till off the store network entirely.\u003c\/li\u003e\n\u003cli\u003eThe Type-A port also powers compatible Star accessories such as the SCD222U display.\u003c\/li\u003e\n\u003cli\u003eWall mounting bracket, rubber feet and a switch cover are all in the box.\u003c\/li\u003e\n\u003cli\u003eGuillotine auto cutter rated for 2,000,000 cuts, with a 100 km print head life.\u003c\/li\u003e\n\u003cli\u003eThe power supply is built into the printer, so only a mains cord leaves the unit.\u003c\/li\u003e\n\u003cli\u003eDrives a cash drawer or external buzzer from the built-in peripheral connector.\u003c\/li\u003e\n\u003cli\u003eTakes 80 mm and 58 mm receipt rolls, with the 58 mm paper guide supplied in the box.\u003c\/li\u003e\n\u003cli\u003eEnergy Star certified, and backed in the United States by a 2-year Star warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e TSP143IIIU Grey, Star generation TSP100III\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterfaces:\u003c\/strong\u003e USB Type-B for host data, USB Type-A for an iOS device\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint method:\u003c\/strong\u003e Direct thermal line printing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e Up to 250 mm per second\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e 203 dpi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedia width:\u003c\/strong\u003e 80 mm and 58 mm rolls, up to 83 mm roll diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint width:\u003c\/strong\u003e 72 mm on 80 mm paper, 51 mm on 58 mm paper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto cutter:\u003c\/strong\u003e Guillotine, rated 2,000,000 cuts, 100 km print head life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Internal supply, 100 to 240 V AC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeripheral port:\u003c\/strong\u003e Cash drawer and external buzzer connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years in the United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 142 x 204 x 132 mm, approximately 1.68 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTwo ports, two jobs\u003c\/h3\u003e\n\u003cp\u003eThis printer has two USB ports and they are not interchangeable. The Type-B port is the host data connection: it takes the supplied A-to-B cable from a Windows PC or an Android device and carries print data in the ordinary way. The Type-A port faces the other direction. It is there for an iOS device, and it also supplies power to a tablet or drives a compatible Star accessory such as the SCD222U customer display. Star does note that if a device is charging on the Type-A port while another host occupies the Type-B port at the same time, charging is limited to 0.5 amps. There is no Ethernet, Wi-Fi or Bluetooth on this part number.\u003c\/p\u003e\n\u003ch3\u003eDriving an iPad\u003c\/h3\u003e\n\u003cp\u003eThe TSP100III series is Apple MFi certified for its USB models, and that certification is what lets an iPad or iPhone talk to this printer over a wire, with the till application printing directly and the tablet charging from the same lead. The printer has no Lightning connector on it. What it has is the USB Type-A port, and the connection is made with a Lightning to USB Type-A cable running from the tablet to the printer. Star's own support article is blunt about it: the TSP100IIIU only supports a USB Type-A connection. For a fixed counter iPad till with no network dependency, that is a clean and very stable arrangement.\u003c\/p\u003e\n\u003ch3\u003eThe cable you need\u003c\/h3\u003e\n\u003cp\u003eRead this before ordering for an iPad deployment. The box contains a USB A-to-B cable, which is the cable for a PC or Android host. It does not contain a Lightning cable. A buyer who plans to run an iPad on this printer has to supply that lead separately, and it is the single most common reason a TSP143IIIU arrives and cannot be commissioned on the day. The supplier part description for this code abbreviates Lightning to Ltg, which reads like something in the carton. It is not. Order the Lightning to USB Type-A cable at the same time as the printer and the installation takes ten minutes.\u003c\/p\u003e\n\u003ch3\u003eSpeed and cutter life\u003c\/h3\u003e\n\u003cp\u003eEvery TSP143 in this range prints at the same headline rate, up to 250 millimetres per second at 203 dpi, which clears a normal grocery or hospitality receipt in about a second. What separates a printer that lasts from one that does not is the cutter, and Star rates the guillotine here at two million cuts. The print head is rated for 100 kilometres of paper and the mechanism carries a 60 million line MCBF figure. For a till running two hundred transactions a day those numbers are the difference between a consumable and a fixture. Media handling is drop-in: lift the cover, drop the roll in, close it, and the printer feeds and cuts without threading.\u003c\/p\u003e\n\u003ch3\u003eInternal power supply\u003c\/h3\u003e\n\u003cp\u003eThe power supply is inside the printer. That sounds like a footnote until you have wired a counter and discovered that the printer needs somewhere to hide a brick, and that the brick has to sit where a cleaner will not kick it. Star runs mains straight into the chassis at 100 to 240 volts, 50 or 60 hertz, so the only thing leaving the printer is a detachable mains cord. It makes the unit slightly deeper than a printer with an external adapter and considerably tidier once installed. It also means one fewer part to lose when a unit is moved between sites, and one fewer thing to specify when you order a replacement.\u003c\/p\u003e\n\u003ch3\u003eWhat is included\u003c\/h3\u003e\n\u003cp\u003eStar's accessory list for this printer covers the main unit, a mains power cable, the USB A-to-B interface cable, the paper roll guide for 58 millimetre media, four rubber feet, a switch cover, a wall mounting bracket with two screws, and the Easy Setup and Safety guides. The Lightning cable for an iOS device is not included, as noted above. Star's United States marketing copy mentions a starter paper roll that its own factory accessory list does not itemise, and Star notes that included accessories vary by model, so treat a first roll of receipt paper as a separate line on the order.\u003c\/p\u003e\n\u003ch3\u003eWarranty and support\u003c\/h3\u003e\n\u003cp\u003eStar covers this printer in the United States with a 2-year warranty, and offers EXTEND-A-STAR and SWAP-A-STAR service plans that take the term to three or four years, with SWAP-A-STAR providing an advance replacement unit rather than a repair turnaround. Note that Star's European operation publishes a longer standard term; the figure that applies to a printer bought in the United States is the 2-year one, and that is what we quote. Drivers, manuals and configuration utilities remain available from Star's support site, and the unit is Energy Star certified.\u003c\/p\u003e\n\u003cp\u003eFor a fixed iPad or PC till that wants a wired connection, a two million cut guillotine and no network to configure, the Star TSP143IIIU 39472310 is a proven choice; remember the Lightning cable. Contact us to learn more or secure this solution for your business today.\u003c\/p\u003e","brand":"Star Micronics","offers":[{"title":"Default Title","offer_id":46802991055045,"sku":"39472310","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/2846\/5605\/files\/star-micronics-tsp143iiiu-thermal-receipt-printer-250-mm-sec-39472310.jpg?v=1787578406"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/2846\/5605\/collections\/logo-star-micronics.png?v=1787578808","url":"https:\/\/barcodeprintershop.com\/es\/collections\/star-micronics.oembed","provider":"Barcode Printer Shop","version":"1.0","type":"link"}