Zebra Level VI AC DC Power Supply Brick 12V 4.16A 50W No Cords Included PWR-BGA12V50W0WW

Key Features

• Genuine Zebra part, specified by part number in Zebra's own accessory guides.
• No cords are included. A DC line cord and a country-specific AC line cord are both sold separately.
• AC input 100-240 V at 2.4 A, so it works on any mains supply worldwide with the right cord.
• DC output 12 V at 4.16 A, 50 W.
• Meets US DOE Level VI efficiency requirements.
• This is the current part. Zebra's own guide states it replaces PWRS-14000-148R.
• Powers Zebra single-slot cradles, four-slot battery chargers, powered USB cables, and ET51 or ET56 docks.

Key Specifications

• Part class: External AC/DC power supply, desktop brick
• AC input: 100-240 V, 2.4 A
• DC output: 12 V, 4.16 A, 50 W
• Efficiency: US DOE Level VI compliant
• Cords included: None. DC line cord and AC line cord both sold separately
• Supersedes: PWRS-14000-148R
• Genuine Zebra: Yes, specified by part number in Zebra accessory guides

Read this before ordering

This power supply ships with no cords at all, and that is the single most common support call this part generates. Zebra's own accessory guides say so three separate times, in the wording requires DC line cord and country-specific AC grounded line cord. The brick has a mains inlet at one end and a DC connector at the other and neither cable is in the box. A working power path therefore needs three part numbers: this supply, an AC line cord from the wall, and a DC line cord from the brick to whatever is being powered. Ordering the brick alone and expecting to plug something in is the mistake to avoid here, and it is an easy one to make.

The two cords

The AC line cord for North America is the Zebra 23844-00-00R grounded AC line cord, a grounded 7.5 ft three-prong cord, and we stock it. The DC line cord is the one that needs attention, because its part number depends on what is being powered rather than on the brick: CBL-DC-375A1-01 for scanner cradles and powered USB cables, CBL-DC-388A1-01 for single-slot cradles and ET51 or ET56 docks. Zebra publishes the pairing in the accessory guide for each device, so the right reference is the guide for the thing being powered and not this listing. If the target device is not certain, confirm it before ordering rather than after.

Electrical specification

The supply takes 100 to 240 V AC at up to 2.4 A, which means it works on any mains supply in the world given the right AC cord, and delivers 12 V DC at 4.16 A for 50 W. It is certified to US DOE Level VI, the efficiency standard that governs external power supplies sold in the United States, which matters for federal and state procurement and for sites with energy reporting obligations. Zebra does not publish the DC output connector type or the AC inlet type for this part in any document located, and that is a real gap in Zebra's own material rather than an omission here. The brick does not terminate in a device plug; it mates with the separately ordered DC line cord.

Current, not legacy

It is worth stating that this is the successor part rather than an older one being run out. Zebra's DS81xx Technical Accessory Guide prints, on two independent reads, that PWR-BGA12V50W0WW replaces PWRS-14000-148R. Anyone holding stock or documentation that names the older supply should read across to this part number. No end-of-sale or end-of-life notice exists for this one. Its usefulness comes from being general purpose: rather than a supply tied to a single device it is Zebra's standard 12 V 50 W brick across several product lines, which means one spare on the shelf covers cradles, chargers and docks alike.

Barcode Printer Shop stocks genuine Zebra parts by exact part number, with the companion items a part needs listed alongside it. Contact us to learn more or secure this solution for your business today.